
The dining table is where a family sits down together, so it should suit your room and the way your household gathers. Son&Bear dining tables are made for homes across Malaysia, each to your configuration. Choose a round, rectangular, oval or extendable table with a top in sintered stone or solid ash, on a solid ash base we design ourselves.


































Allow about 600 mm of table edge for each person and 900 mm behind each chair. As a guide, a 1.6-metre rectangular table seats six, a 2.0-metre table eight and the 2.4 by 1.0-metre size ten. Our round tables, from 0.8 to 1.8 metres, seat two to eight, and an extendable table stays at its everyday size until guests arrive.
For six, choose a 1.6-metre Rumi, Alto, Tara or Levin, or a 1.4-metre round such as the Hara, Laura or Ori. For eight, choose any rectangular or oval table in 2.0 metres, or a 1.5-metre round extendable such as the Levi. For ten, choose the 2.4 by 1.0-metre size, the Alto Extendable or a 1.6-metre round extendable.
Yes. The Alto, Austin, Hira, Hiro, Juliet, Levin, Rumi, Tara and Vara all come in a 2.0-metre size, 200 by 80 cm, which seats eight as a guide. All except the Levin also come in 2.2 metres and 2.4 by 1.0 metres, and the Alto Extendable opens to 2.0 or 2.3 metres.
Choose the base by how you seat people. The Rumi, Alto and Tara stand on panels set in from the ends, so no leg gets in the way, and the Austin and Juliet take a bench along one side. The Hara, Laura and Ori stand on pedestals, and the Hiro sets an oval top on a fluted drum.
Our marble tables set a top of natural marble or travertine on a wood base. Every other table stands on solid American ash in six finishes and takes a top in solid ash or sintered stone, except the Alvi, which is solid ash only. Our guide to sintered stone and solid wood explains how to care for each.
Sintered stone is formed from mineral under heat and pressure. On a Son&Bear dining table, it resists heat, stains and scratching, wipes clean in a single pass, and holds that surface for years. Every Son&Bear dining table except the Alvi and our marble tables can take a sintered stone top.
Both are built for real use; they simply age differently. If your household cooks most nights, choose sintered stone, which resists heat, stains and scratching and wipes clean in a single pass. If you want the warmth of wood, choose solid ash, which shows its grain and can be sanded back and re-oiled rather than replaced.
Every stone design is the same sintered stone, from plain, pale surfaces to clear veining, so you are choosing the look only, and the base takes any of our six wood finishes. Try the pairings in Build Your Table, then see the stone in person at our showrooms, as a pattern reads differently across two metres.
Our sintered stone and solid ash tables carry a one-year limited warranty that covers manufacturing defects in materials and workmanship. It does not cover normal wear and tear, such as scratches or watermarks, or damage from misuse. The warranty is in addition to your rights under the Consumer Protection Act 1999, and the full terms are on our warranty page.
Our showrooms are at 100 Jalan Maarof in Bangsar, Kuala Lumpur, and at Galacity Prime, Jalan Tun Jugah, Kuching, both open from 10am to 7pm every day. Walk in with no appointment and bring your floor plan, and our team will show you the wood finishes and stone designs with samples in hand.
Should you choose sintered stone or solid wood? →
How do you measure for a sofa and a dining table? →